Gas piston generators
Gas-piston power plant of open type 800 kW EKV-NG-800-GE
Electric power, kW: 834/623/417; Nominal power, kW: 800; Номинальное напряжение, В: 380/220; Nominal current frequency, Hz: 50; Electrical efficiency of the installation, %: 39,94; Type of current: alternating 3-phase; Degree of protection: ІР23
..
Price:
Made to order
Container-type gas piston power plant 1500 kW EKV-NG-1500-CT-C
Electric power, kW: 1560; Nominal power, kW: 1500; Номинальное напряжение, В: 400/230; Nominal current frequency, Hz: 50; Electrical efficiency of the installation, %: 42; Type of current: alternating 3-phase; Degree of protection: ІР23
..
Price:
Made to order
Gas-piston power plant of open type 1500 kW EKV-NG-1500-CT
Electric power, kW: 1560; Nominal power, kW: 1500; Номинальное напряжение, В: 400/230; Nominal current frequency, Hz: 50; Electrical efficiency of the installation, %: 42; Type of current: alternating 3-phase; Degree of protection: ІР23
..
Price:
Made to order
FAQ: Gas Piston Power Plants
The main advantage is the lower cost per kilowatt-hour. Natural gas is significantly cheaper than diesel fuel. Additionally, gas piston generators have a longer engine life before major overhauls and are more environmentally friendly, making them the primary choice for 24/7 industrial base-load operations.
An open-type gas piston plant is mounted on a steel frame and designed for indoor installation within specially prepared engine rooms. This is the ideal option if your facility already has a building with proper ventilation and fire-suppression systems, allowing you to save on the initial cost of the unit.
The containerized type is a fully autonomous solution. The equipment is housed in a reinforced, heat-insulated container that protects against weather and noise. These plants require no capital construction, are easy to transport, and can be rapidly commissioned outdoors even in harsh environments.
Yes, EKVIVES gas piston generators can be equipped with a Heat Recovery System (HRS). This allows you to generate not only electricity but also hot water or steam for industrial needs, increasing the overall efficiency (CHP) of the plant up to 90%.
